Whether you are a professional or an amateur golfer, Drivers and Fairway Woods are the words that you must have heard thousand times. In simple words drivers are the commonly known golf sticks especially designed for tee shots.
You will find number of golf drivers in the market made up of Titanium, Copper, Carbon, Nickel and some other alloys. These alloys provides hardest look to the golf driver.
Almost all golf drivers available in the market are built with an idea of compression golf ball at impact. Golf drivers with flexible face, designed to eliminate energy at impact, are considered better for improvement of game.
Golf Drivers are considered as the longest club. Presently golf drivers with 45 inches length are common. This length factor makes it difficult to control the swing.
To make the best use of the modern driver follow these few tips:
1) Tee the ball up higher.
With the larger head modern driver you need to tee the ball much higher than you are used to with your old driver. Use three inch tees and set the ball up so the top of the driver is about one third of the way up the ball.
Halfway up the ball for the old driver and one third up for the modern driver.
Because the ball is higher off the ground you will need to move back from the ball an inch or two to keep from hitting the heel side of the club face. In your normal position the ball will be at the heel of the club.
Experiment moving away from the ball an inch, hit the ball, look at the ball mark on your club face. Continue to adjust until the ball marks are generally centered on the club face.
2) Hit the ball on the upswing.
With every other club in the bag, except your putter, you hit the ball on the down swing. At least you should. With the modern driver you hit the ball on the upswing.
3) Move the ball farther forward.
Move the ball forward, toward the target, in your stance to insure hitting the ball on the upswing. I used to play the ball off my left heel and now I play it just left of my left big toe.
Depending on your stance, you may need to move the ball even farther left of your left foot. You need to move the ball up so the club hits the ball on the upswing.
To get the most out your driver you need Creating a Perfect, Consistent Golf Swing that contains all the information needed to swing correctly.
On the other side shorter clubs are known as fairway woods, generally referred to as fairway metals. Materials used for manufacturing both golf drivers and fairway woods are same.
Woods are so called because, traditionally, they had a club head that was made from hardwood, generally persimmon, but modern clubs have heads made from metal, for example titanium, or composite materials, such as carbon fiber.
These fairway woods posses the proprietary of progressiveness like irons. There are different types of fairway woods like 3-wood, 4-wood, 5-wood, 7-wood and 9-wood.
One may rarely find a 2-wood. These fairways woods may decide the distance the golf club go after hit.
Usually fairway woods have smaller heads comparing to golf drivers. This aspect makes fairway woods easier than drivers when it comes to controlling the swing. It is advisable for beginners to opt for fairway woods instead of trying to use a driver.
You can use the fairway to hit the driver if you are a skilled golfer.
Greater lofts and smaller heads of fairway woods help in hitting the ball high into the air.
Fairway woods are convenient to handle than long drivers and are used basically by amateur golfers and beginners.
Creating a Perfect, Consistent Golf Swing is the main purpose of both drivers and fairway woods when hitting the ball.
In simple words drivers are used to hit the ball on the upswing and fairway wood is used to hit the club at swing bottom.
Fairway woods consists of large heads, bulging clubface, flattened soles sliding over the ground and are spherical in shape.
In the past club-heads were made from persimmon and maple wood.
Club heads in the present era are made from metal alloys and hence are termed as metal-woods. Senior players and ladies prefer fairway woods that are higher lofted.
It is so because fairway woods give them easier hit to the club while hitting the club high in the air at lower speed.
Shaft length of fairway wood may differ from 40 inches to 45 inches.
The longest version of club is termed as driver. Drivers have bigger club-head. Drivers are mainly used for hitting off the tee. Skilled golfers can hit drivers from the turf. The standard length of driver is 45 inches.
You may choose a driver or a fairway wood according to your skills and style. Some skilled golfers prefer shorter shafts which facilitates them to use it easily despite the fact that shorter shafts are likely to reduce the distance.
Usually fairway woods are fitted with graphite shafts considering their light weight. This light weight enables golfers to accelerate higher club-head speed and achieve longer distance.
The USGA approved length of the shaft is 47 inches. However, you may find some fairway woods with shaft length of up-to 50 inches. These longer shaft woods are used for long drive tournaments but are illegal.
It is evident that success and improvement of your game depends upon the right club may it be drivers or fairway woods.
To sum it all up.
The most important lesson in golf is to just have fun. The internet is a good source for information on how to play the game.
Secondly, there are many videos available that can teach you everything from improving your swing, to putting. Check out Our Golf Shop for tips on improving your game, and for your golf equipment needs.
Most people give up on the game of golf before they really understand the dynamics of hitting that little ball. Get Creating a Perfect, Consistent Golf Swing to discover the secrets to hitting a golf ball perfectly … every time you swing!